Replace On/Off Circuit Breaker

Replace On/Off Circuit Breaker

It is best to have two people available.

1. Unplug the table.
2. Stand at the side of the table and lift one side of the table, tilting it to the side. One person can balance the table while the other person replaces the switch.
3. Disconnect the two w ires from the back of the switch by pulling on the plastic connector that is crimped on the wire.

4. Connect the two wires to the new switch and make sure the button is pushed in so that the white band is not visible. Plug the table in.

5. Use the control panel to elevate the table so that there is a little m ore working room for removing the original switch from the base.

6. Unplug the table.

7. Tilt the table and disconnect the wires from the new switch.

8. Remove the original switch from inside of the base by squeezing the “wings” on the switch and push it out from the inside.

9. Insert the new switch from the outside of the base and connect the two wires.