Add Timer

AFT
Add Timer

Parts:

1. Complete control box w /timer attached to
2. mout angle #M 1294
3. screw s, #7 x 1″long (H 95) – 2 qty

Mouting Explanation –

Control boxes with and without Timer are mounted the same way. A metal angle is bolted to the top of the box and two wood screws secure it to the bottom of the cushion.

Wiring Explanation –

Every AFT table has the same cable entering the control box. The green with black stripe wire and the blue with black w ire for the timer.

To remove the original box-

1. Remove the four screws that secure the front panel to the box.
2. Gently pull each wire connector off all the components.
3. Gently remove the cable from the back of the box.
4. Remove the two screws that hold the box to the cushion.

To install the box with the timer –

1. Secure the box and bracket to the cushion with the two dry wall screws.
2. Gently insert the cable into the back of the box.
3. Gently push each color wire onto the correct component.
4. Secure the front panel to the box with the four original screws.